Home > Solved Pc > Solved: PC Won't Boot Up. No Beeps No Display No Bios

Solved: PC Won't Boot Up. No Beeps No Display No Bios

Keyboard Cheap Mouse Logitec M510 PSU 550W Case Mini ATX Cooling Fan Hard Drives SG 1.5TB WDC 1TB (Backup) Internet Speed 50Mph. Voltage most likely. Your motherboard manufacturer's website will have a support page dedicated to your motherboard's model, and on this support page should be a compatibility list for such components as video cards, CPUs it may be the FX needs a BIOS update to be recognized. check over here

You'd have to do that with the old CPU on. I thought it was odd as I thought it should have sent a beep code indicating the ram was at fault, but I think that my onboard speaker is not connected, NCIX Tech Tips 355,407 views 7:43 How to Repair a DEAD Computer - Duration: 58:55. If at any time the BIOS display fails again then you've identified the defective component.

Heh funny reply... solved Asus P5E post beep troubleshooting solved New build Wont boot up bios, no post beep or display Code 62 solved First build won't post or display, no post beep with I just wanted to say thanks a million! The voltage modification should be very small...

I tried holding down power button for 30 seconds but that didn't work. I mean Mbps. RodneyDickson 357,425 views 29:13 Complete Computer Diagnosis - Duration: 48:16. Reports: · Posted 5 years ago Top Topic Closed This topic has been closed to new replies.

I've assumed you've already ascertained that the monitor is OK. Somewhat unlikely since it is straight off a RMA, but it is possible.Something to keep in mind, at least. Sign in Statistics Add translations 1,792,453 views 5,330 Like this video? https://www.neowin.net/forum/topic/1181095-pc-wont-boot-no-video-no-beep-but-fans-spin/ can u do a step bystep please?

Check of course that the CPU is mounted correctly -- normally once you've inserted the CPU into the MOBO you should never need to remove it again -- but if you Password Advanced Search Show Threads Show Posts Advanced Search Go to Page... I've had my PC for a year. CPU fan spins.

Report esssss- May 25, 2009 at 10:14 PM UPDATE 2 (RESOLVED?): Well been playing on the PC for many hours now over the past few days, and it hasn't had problems

but a bad/dead PSU will never power up for a BIOS post that would report results on the screen and beeps. I still can't shut it off with the case button no matter how long I hold it in...which seems a little strange. A bad motherboard can beep or not...

Thanks again! check my blog i just cant tell surelly. Removed the battery for ten minutes with the psu unplugged. But, I, from all 4 RAM's, don't think they all failed..

Unless i remove a RAM stick in which case the keyboard light's up and CTRL ALT DEL will reboot the PC, tho there still is no image transmitted to the monitors. The hdd was very fragged, so removed some software like anti-virus and a few games and large files, then ran a clean-up and lastly a defrag of the master hdd (seagate It is also an easy way to bypass a questionable case power switch.This checks the PSU under no load conditions, so it is not completely reliable. http://blightysoftware.com/solved-pc/solved-pc-must-warm-up-before-it-will-boot.html Checks out. *I realize this could still be bad Breadboarding.

The battery for the CMOS have been removed and re inserted, besides it has a kinda loose proof mechanism holding it in place. PC won't POST/beep/boot solved pc wont boot no post no beep no case/cpu fans My PC wont POST/beep/boot! or look for and old school monitor?

CareyHolzman 488,041 views 1:03:46 How to fix a broken hard drive Beeping noise or clicking RECOVER GET DATA BACK FOR FREE!

This is xxxxxxxxxx what the hell Is It's problem? Without specialist tools this is the only way to diagnose the problem -- go right back to the start and eliminate all the components. Examined the heat sink compound and CPU pins. Although a friend of mine used Google to get the manual of the Mobo in PDF and spotted the Beep codes in it Lmao..

ive tried 2 different moniters and 2 different mouses. new msi B85i ,no post ,no beep and tried all the troubleshooting steps including breadboarding. I breadboarded my components in order to avoid any possible shorts to the case and worked down the checklist.* CPU power connector check* Motherboard power connector check* Video card fully seated have a peek at these guys You may have to tweak something in the BIOS...

Add to Want to watch this again later? I've assumed you've already ascertained that the monitor is OK. all FX editions are back editions. Cooling Air, Glacer 240L expanded, custom EK loop with duel D5's Hard Drives Samsung SSD 840 Pro OCZ Agility 3's OCZ Vector's WD's Blue, red, green, Velociraptors Seagate USB3 & Hybrid's

ChicanoAug 30, 2014, 3:46 AM No, I don't think so.. Seems to be some intermittant fault somewhere. Which would be Single Channel if you're using the new RAM module only, and the CPU supports Dual-Channel. Using a different PSU - waiting for a friend to let me borrow his on Friday.

It crashed and totally froze up for ages so I unplugged it and turned it back on again and lo and behold, lol, no power to any peripherals or any monitor However, I still have a a nagging thought that something other than the ram could have caused it, I am thinking if if one ram wasn't seated properly, it still should I tried the Pressing power button without the power cord trick but it didnt work then I remembered that only the KB and mouse have to be plugged in so I Check also the monitor is connected PROPERLY too.

Gamer Remedy 31,885 views 1:40 how to repair no display desktop motherboard - Duration: 10:16. If you DO get a BIOS display start replacing components one at a time Connect external graphic card again (if you are using one) BEFORE the RAM. I thought something might have been knocked loose when it was moved, so I unplugged the hdd cables, video card and power cables to the motherboard quite a few times, checked Swapped RAM with the other DIMM slot.

© Copyright 2017 blightysoftware.com. All rights reserved.